DOWNLOAD DOCUMENT
They describe how to fit the bubble trap to an Evolve™ bio-process column. The bubble trap will prevent air being introduced into the column and will also dampen any pulsation caused by the pump system.
Other content in this Stream
Operating instructions for the Evolve™ chromatography columns 70 to 140mm id. include specifications, chemical compatibility and spare part details to complement the semi disposable approach..
General operating instructions for the Evolve™ 200 & 250 mm i.d. columns including specifications, chemical compatibility and spare part details to complement the semi disposable approach.
General operating instructions for the Evolve™ 350 column, including specifications, chemical compatibility and spare part details to support the semi disposable approach.
Instructions for replacing wetted components for Evolve™ 200 and 250 mm i.d. bio-process columns using a Refresh kit.
Instructions for replacing wetted components for Evolve™ 350 mm bio-process columns using a Refresh kit.
Instructions for replacing wetted components for Evolve™ 70, 100 and 140 mm i.d. bio-process columns using a Refresh kit.
This binder contains validation support for all materials used to construct the Evolve™ bio-process columns. This includes material certificates for all wetted components to support the single use app
This document contains the validation support document for the Evolve™ bio-process column accessory: 4 Port 2 Way Valves.
This document shows the contents of each of the spare part kits available for the Evolve™ chromatography columns.
Instructions for fitting the support bracket for the Evolve™ bio-process columns. The bracket can be used to support valves, tubing and other accessories.
The column isolation kit allows the Evolve™ bio-process column to be isolated from a chromatography system or pump thereby eliminating the possibility of introducing air and protecting the column.
The column flow reversal kit allows the flow of liquid through an Evolve™ bio-process column to be changed from down flow to up flow and vice versa, without the need to remove column tubing.
